APPLICATION

Start by mixing a 2:1 ratio of 2 part A resin to 1 part B hardener curing agent into a plastic measuring container, then add colorant or metallic mixing powder to the mix.

Mix the contents for a MINIMUM of 3 to 4 minutes thoroughly and slowly and when ready pour into your project or casting project slowly to help reduce creating any air bubbles.

 The working time is 5-10 hours at 68-degree Fahrenheit, giving you enough time to properly pour the resin, mix colorants and create patterns accordingly.

This resin can be poured at a maximum of 2-inch thickness and is ideally used for CRYSTAL CLEAR FINISHES or with any of our metallic pigments.

In ideal lab temperatures this resin cures between 96-120 hours at 2-inch pours. Thinner pours and thin films can take much longer.

Note: When pouring over 6-9 gallons at a time with casting resin, using fans to aerate the air in the room will help the resins cure better, more consistently & will help prevent any exothermic heat reaction.